Yueqing Jixiang Connector Co.,Ltd
Call us on:+8615167894333   E-mail: jx5@jxljq.com
News
Home > News > Content
PE Flexible Pipe In The Printing Of The Color Settings
Yueqing Jixiang Connector Co.,Ltd | Updated: May 17, 2017

The safety of the printing of the PE Flexible Pipe and the smoothness of the printing process, in addition to the printing equipment, printing materials and printing technology and printing technical staff operating skills level, 70% -80% depends on the printing Former design and pre-press plate quality. Therefore, prepress designers understand and become familiar with the characteristics of the printing process and printing process and the design of the printed matter to ensure the quality of the guarantee is very important.

PE Flexible Pipe printing in the design Note:

PE Flexible Pipe Color settings:

PE Flexible Pipe Design often used in the color mode, one is RGB, one is CMYK mode.

RGB color mode is a color standard, through the red (R), green (G), blue (B) three color light channel changes and their superposition between each other to get a variety of colors, this The standard covers almost all the colors that human vision can perceive, and is one of the most widely used color systems. RGB application on the screen color.

PE Flexible Pipe The CMYK mode is the characteristic of the light absorption and reflection of the ink pair for the printing application. The color of the object seen by the human vision is actually the color of the light that reflects the rest of the white light after the object absorbs the light of some wavelength in the white light The

RGB color mode in the black is superimposed by the RGB, but with CMYK color mode, just use a black can.

PE Flexible Pipe In the practical application, due to the color of the three primary colors C (green), M (magenta), the color of the three primary colors C (green), M (magenta), Y (yellow) equal amount can be K (black) ), Y (yellow) ink purity problem, C (green), M (magenta), Y (yellow) three primary colors of ink add the same amount of pure black, only dark brown gray, so to get a pure Of the black must be in the pigment three primary colors C (green), M (magenta), Y (yellow) need to increase K (black).

The more the color of the ink is mixed or the more, the darker the color, the lower the brightness, and the closer the purity is to the black.

PE Flexible Pipe Therefore, where the application and print the manuscript, it is best to apply CMYK color mode. Such as RGB mode output picture directly print, print the actual color and RGB output picture color is very different. In the printing may produce color changes, darkening, or color changes.

PE Flexible Pipe Of course, there are many factors in the printing process will lead to print color change or color cast (such as prepress production, printing, printing equipment, ink, substrate physical properties, etc.) but the design staff in the design of the first Step must ensure the correctness of the color mode.


Product Categories

Fast Track

Copyright © Yueqing Jixiang Connector Co.,Ltd