Yueqing Jixiang Connector Co.,Ltd
Call us on:+8615167894333  E-mail: jx5@jxljq.com
Home > Exhibition > Content

Cable installation issues

Yueqing Jixiang Connector Co.,Ltd | Updated: Jan 29, 2016

Low resistance conductors conductors the connection request and sufficient mechanical strength, the connection cannot appear at a sharp corner. Low voltage cable conductor connection is commonly used in crimping, takes note:
(1) select suitable conductivity and mechanical strength of the conductor pipe;
(2) take over clearance of inner diameter and outer diameter of the cable cores taken 0.8~1.4mm;
(3) after crimping the resistance value should not be greater than 1.2 times times the cross section conductor copper conductor joint tensile strength not less than 60N/mm2;
(4) before crimping, conductor outer surface and the connection tube coated with conductive adhesive and wire brushes damaged film;
(5) connecting pipe, sharp corners, edges and other on the core conductors, smooth with a file or sandpaper.

Product Categories

Fast Track

© Yueqing Jixiang Connector Co.,Ltd